Art. No. 50100
17 cm (6.5") HiFi-ceiling speaker with corrosion free grille, suitable for the installation in suspended ceilings of any material. Equipped with a 2-way coaxial driver. Quick snap-in mounting due to round ceiling cut-out through which the speaker with mounting ring can be installed. A push-terminal block allows a quick and easy connection. A quick-mounting bayonet connection provides an easy installation of the grille.
DL 18/2 T can be supplied painted in other RAL colours on request.
Speaker cabinet systems for ceilings are available for these speakers.
Typical applications:
- For fitting in hollow ceilings, for music and speech in shops, at home, hotels etc.
Attributes:
- Moisturised cone
- UV-resistant
- Metal basket, non-corrodible
- functionally at low temperature according to EN 60068-2-1 (-40 °C; 96 h)
- up to the standards of the Germanischer Lloyd (requirements for electrical equipment / low temperature)
Used in / Accessories:
FD 18
FD 18 L
|
|
frequency- and impedance response
|
| Technical Data: |
| Rated power |
50 W |
| Maximum power |
70 W |
| Nominal impedance Z |
8 Ohm |
| Frequency response |
50–20000 Hz |
| Mean sound pressure level |
90 dB (1 W/1 m) |
| Angle of sound emmision |
64°/4000 Hz |
| Resonance frequency fs |
90 Hz |
| Magnetic induction |
0,95 T |
| Magnetic flux |
310 µWb |
| Height of front pole-plate |
4 mm |
| Voice coil diameter |
25 mm |
| Cutout diameter |
200 mm |
| Net weight |
1,15 kg |
| D.C. resistance Rdc |
6,9 Ohm |
| Mechanical Q factor Qms |
2,68 |
| Electrical Q factor Qes |
1,68 |
| Total Q factor Qts |
1,03 |
| Equivalent volume Vas |
15 l |
| Effective piston area Sd |
129 cm² |
| Dynamically moved mass Mms |
7,9 g |
| Inductance of the voice coil L |
0,75 mH |
| Protective system |
IP X3 |
| Heat resistance |
−40 ... 80 °C |
| DL 10 100 V |
DL 10 8 OHM |
| DL 13/2 100 V |
DL 13/2 T 8 OHM |
| DL 18/1 100 V (RAL 9010) |
DL 18/1 100 V (RAL 9016) |
| DL 18/2 100 V |
DL 5 8 OHM |
| DL 8 100 V |
DL 8 8 OHM |
| ML 10 T 100 V |
ML 16 100 V |
|
|
|
