Secure Checkout
Digital Radio DAB+ On-Glass Active Internal Aerial

Thumbnail Filmstrip of Digital Radio DAB+ On-Glass Active Internal Aerial Images

    Purchase Digital Radio DAB+ On-Glass Active Internal Aerial

    Digital Radio DAB+ On-Glass Active Internal Aerial

    $69.00 each
    SKU: dab-active-on-glass-digital-radio-antenna
    Brand: Soundlabs Group
    Quantity in Basket:  None
     
    256-Bit SSL Secure Checkout



    Stock Status: Local stock - dispatches in 1-2 business days.
    Warranty: Australian warranty, expert advice & tech support.
    Shipping: Regular or express, plus tracked options at checkout.
    Fulfilment: Shipped from Australia by us, a 100% local business.
    Questions? Call or email us - see our contact page & FAQ.
    - options & final combined price at checkout.

    Digital Radio DAB / DAB+ On-Glass Aerial / Antenna

    Upgrade your vehicle's digital radio reception with this high-performance internal on-glass windscreen aerial. Designed as a superior alternative to the standard film aerials supplied with aftermarket head units, this amplified dipole aerial features an extended 52cm metal element to boost signal pickup in areas with weak or average DAB broadcast coverage.

    Features:

    • Extended 52cm amplified dipole design provides better signal gain than standard compact glass-mount aerials.
    • Helps reduce signal dropouts and audio buffering in fringe or low-coverage DAB and DAB+ broadcast zones.
    • Discreet internal windscreen mounting protects the aerial element from car washes, weather exposure and vandalism.
    • Clear self-adhesive strip gives a clean, unobtrusive appearance on your windscreen.
    • Powered directly via 12V DC phantom power from your DAB tuner or head unit, with no additional power wiring required.

    Installation Details:

    • Mount the aerial on the inside of the windscreen, on the passenger side, clear of the driver's view.
    • Temporarily position the aerial using removable tape to test reception before sticking it down. Once stuck, it cannot be removed without damaging it.
    • Ensure the glass surface temperature is above 20°C and clean thoroughly with isopropyl alcohol or a similar non-residue solvent before application.
    • Peel the yellow protective paper backing to expose the clear self-adhesive strip and apply firm, uniform pressure across the aerial element to secure it to the glass.
    • Route the 3m RG174 coaxial cable neatly along the windscreen trim and dash lining to your DAB tuner or head unit, taking care around airbags.
    • Connect the SMB female connector securely to the DAB aerial input on your head unit and ensure phantom power (12V DC) is switched on in the tuner menu settings.

    Specifications:

    • Type: Amplified dipole with self-adhesive backing (the strip is clear, with yellow backing paper)
    • Width: 52cm (approx.)
    • Frequency Range: Band III 174 to 237 MHz / L Band 1452 to 1492 MHz
    • Impedance: 50 Ohms
    • Supply Voltage: 12V DC (via phantom power from the tuner)
    • Current Draw: 40 mA (approx.)
    • Cable Type: RG174
    • Connector: SMB female
    • Cable Length: 3m (approx.)
    • Operating Temperature: -40°C to 85°C

    Important Notes:

    • This aerial is designed for internal windscreen mounting only and is not suitable for external use.
    • Do not install the aerial in any position that restricts or interferes with the driver's view.
    • Metallic, thermal or climate-control window tints may reduce the signal. In such cases, position the aerial within the non-metallic cut-out area usually reserved for toll tags (refer to your vehicle owner's manual for details).