RetroSound Technophonic Amplifier & R-TW84 Subwoofer Package
Upgrade your vehicle audio system with this matched amplifier and subwoofer package. It combines the compact RetroSound Technophonic 5 channel Class D power amplifier with the shallow RetroSound R-TW84 8 inch 4 Ohm subwoofer. Together they deliver full range sound and solid bass while keeping a low profile in tight cabin spaces. Coupled with separate high-powered speakers and wiring (both optional), you can create an impressive sounding sound system.
What is Included
• 1 x RetroSound Technophonic 5 channel
Class D power amplifier
• 1 x RetroSound R-TW84 8 inch
shallow mount 4 Ohm subwoofer
• 1 x Wired remote subwoofer gain control with 5m cable included with amp
Package Highlights
• Complete system capability with four 65 Watts RMS full range channels for interior speakers plus a dedicated
225 Watts RMS output for the sub bass driver
• Space saving design suited to classic cars and trucks, with minimal mounting depth under seats or behind panels
• Class D digital circuitry is efficient, which helps keep current draw and heat output low
• Built in variable high pass and low pass electronic crossovers allow system tuning
• Subwoofer features a rigid cast aluminium basket, neodymium magnet, and durable polypropylene cone for tight,
accurate low end response
Specifications
RetroSound Technophonic Amplifier:
• Full Range Power Output: 65 Watts RMS x 4 channels at 4 Ohms (95 Watts RMS x 4 at 2 Ohms)
• Subwoofer Power Output: 225 Watts RMS x 1 channel at 4 Ohms (330 Watts RMS x 1 at 2 Ohms)
• High Pass Filter Range: 40Hz - 400Hz
• Low Pass Filter Range: 50Hz - 250Hz
• Dimensions: 330mm W x 134mm D x 47.5mm H
RetroSound R-TW84 Subwoofer:
• Power Handling: 250 Watts RMS / 500 Watts Peak
• Nominal Impedance: 4 Ohms
• Mounting Depth: 50mm
• Cutout Diameter: 203mm
• Enclosure Compatibility: Optimised for sealed enclosures from 3.4 to 28.3 litres
Check Before Ordering
• Make sure you have space for the amplifier (330mm W x 134mm D x 47.5mm H) and allow room around it for airflow
• Check the subwoofer mounting location suits the 203mm cutout and 50mm mounting depth
• Confirm your interior speakers suit the amplifier's 4 Ohm or 2 Ohm outputs
• Please check, and contact us to confirm first if in doubt
Please Note
• An enclosure, speaker wire, power and signal cables, and fuses are not included, so please allow for these
separately
• The amplifier is wired into the vehicle's electrical system. Professional installation is recommended, including
correct fusing of the power supply
For technical support or advice on selecting enclosure options and wiring accessories for your classic vehicle, please contact the team at Soundlabs Group.