SKU: RetroSound-Technophonic-Amplifier Retro Sound Technophonic 5 Channel Class D Power Amp

Retro Sound Technophonic 5 Channel Class D Power Amplifier

This powerful five channel amplifier has four 65 watt RMS full-range channel outputs for mids and highs‚ plus a mono channel with up to 330 watts (2 Ohms) for a subwoofer‚ allowing a complete audio system to be built using a single Technophonic amplifier. Low-level RCA inputs allow the RetroSound Technophonic to work with any after-market radio with RCA outputs. Technophonic comes with a wired remote gain control module that allows you to adjust the bass output on the fly.

The Technophonic offers exceptional dynamic range for the best possible sound reproduction from your RetroSound audio system. The full-range channels have a high-pass crossover for use with full-range speakers. The mono channel has a low-pass crossover to fine tune the bass frequencies for use with a subwoofer. A selectable input mode allows switching between 4 and 5 channel operation.

RetroSound's Technophonic also features low current draw and Class D Digital circuitry. With exceptional dynamic range and low distortion, you'll get the best possible sound from your audio system.

Features:

• 4x 65 W RMS for full range speakers (such as front left and right / front and rear)
• 1x 225 W RMS for a subwoofer
• Bass Boost
• Bridgeable
• Full-range Class D digital circuitry
• Advanced protection circuitry
• 2 Ohm Stable
• Built-in low pass (LPF) and high pass (HPF) electronic crossovers
• Selectable mode switch for 2, 4 and 5 channel operation
• Works with any after-market radio with low-level outputs
• Includes wired subwoofer remote gain control with 5m cable

Specifications:

• Full Range Power Output: 65 Watts x 4 channels RMS @ 4 Ohms
• Subwoofer Output: 225 Watts x 1 Channel RMS @ 4 Ohms
• Full Range Power Output: 95 Watts x 4 channels RMS @ 2 Ohms
• Subwoofer Output: 330 Watts x 1 Channel RMS @ 2 Ohms
• Full Range Frequency Response: 24Hz - 65kHz
• Subwoofer Frequency Response: 24Hz - 250Hz
• Total Harmonic Distortion: <0.2%
• Signal to Noise Ratio (EIA Rated): >95dB
• Bass Boost: 0-12dB @ 50Hz
• Input Sensitivity: 200mV - 6.0V
• Crossover Slope: 24dB
• High Pass Filter (HPF) Frequency Range: 40Hz - 400Hz
• Low Pass Filter (LPF) Frequency Range: 50Hz - 250Hz
• Dimensions: (inches) 12.9" W x 5.3" D x 1.87" H (approx.)
• Dimensions: (mm) 330mm W x 134mm D x 47.5mm H (approx.)