SKU: RetroSound-Stereophonic-Amplifier Retro Sound Stereophonic 3 Channel Class D Power Amp

Retro Sound Stereophonic 3 Channel Class D Power Amplifier

This unique three channel amplifier has two 65 watt RMS full-range front channels outputs for mids and highs, plus a mono channel with up to 229 watts (2 Ohms) for a subwoofer, allowing a complete audio system to be built using a single Stereophonic amplifier. Low-level RCA inputs allow the RetroSound Stereophonic amp to work with any after-market radio with RCA outputs. Stereophonic is bridgeable and 4 Ohm and 2 Ohm stable.

The Stereophonic offers exceptional dynamic range for the best possible sound reproduction from your RetroSound audio system. The full-range channels have a high-pass crossover for use with full-range speakers. The mono channel has a low-pass crossover to fine tune the bass frequencies for use with a passive subwoofer. A selectable input mode allows switching between 2 and 3 channel operation.

RetroSound's Stereophonic amp also features low current draw and Class D Digital circuitry. With exceptional dynamic range and low distortion, you'll get the best possible sound from your audio system.

Features:

• 2x 65 W RMS for full range speakers (such as front left and right)
• 1x 170 W RMS for a subwoofer
• Bass Boost
• Bridgeable
• Full-range Class D digital circuitry
• Advanced protection circuitry
• 2 Ohm Stable
• Built-in low pass (LPF) and high pass (HPF) electronic crossovers
• Selectable mode switch for 2 and 3 channel operation
• Works with any after-market radio with low-level outputs

Specifications:

• Full Range Power Output: 65 Watts x 2 channels RMS @ 4 Ohms
• Subwoofer Output: 170 Watts x 1 Channel RMS @ 4 Ohms
• Full Range Power Output: 90 Watts x 2 channels RMS @ 2 Ohms
• Subwoofer Output: 229 Watts x 1 Channel RMS @ 2 Ohms
• Full Range Frequency Response: 24Hz - 65kHz
• Subwoofer Frequency Response: 24Hz - 250Hz
• Total Harmonic Distortion: <0.2%
• Signal to Noise Ratio (EIA Rated): >95dB
• Bass Boost: 0-12dB @ 50Hz
• Input Sensitivity: 200mV - 6.0V
• Crossover Slope: 24dB
• High Pass Filter (HPF) Frequency Range: 40Hz - 400Hz
• Low Pass Filter (LPF) Frequency Range: 50Hz - 250Hz
• Dimensions: (inches) 9.4" W x 5.3" D x 1.87" H (approx.)
• Dimensions: (mm) 240mm W x 134mm D x 47.5mm H (approx.)