Mundorf Banana Plug Housing MCONBPBK MCONBPRD

Mundorf MConnect Thermoplastic Polymer Housings (Red & Black Pair)

These high-quality thermoplastic polymer housings are designed specifically for the Mundorf MCONBP banana plug series. Featuring a smart hinged clamshell design, they provide both essential electrical insulation and clear channel polarity identification for your speaker connections. Note: banana plugs are NOT included.

The housing allows for a snug, secure fit around the banana plug. Once snapped closed, the design facilitates stackable connections, allowing a second 4 mm banana plug to be inserted into the rear of the assembly. While the standard cable entry is optimised for 2.5 mm cables, the housing can accommodate speaker cables up to 4 mm in diameter by omitting the integrated strain relief or the rear cover flap if necessary.

Key Features & Applications:

• Clear Polarity Marking: Supplied as one red and one black housing for instant identification of positive and negative channels.
• Stackable Design: The rear-entry port is designed to accept a secondary 4 mm banana plug, enabling daisy-chained or bi-wiring setups.
• Secure Snap-Fit: Robust hinged flap snaps firmly shut, locking the cable and banana plug into a protected assembly.
• Versatile Cable Fit: Designed for cables up to 2.5 mm diameter with strain relief; can be adapted for larger 4 mm cables if required.

Specifications:

• Material: High-grade thermoplastic polymer
• Compatibility: Mundorf MCONBP / MCONBPG.CU Banana Plugs
• Colour: 1 x Red, 1 x Black
• Cable Entry: 2.5 mm (standard) up to 4 mm (modified)
• Stackable: Yes, accepts secondary 4 mm banana plug
• Supplied As: 1 Pair (1x Red + 1x Black)
• Note: Banana plugs are not included

Usage & Assembly Tips:

• Initial Setup: Ensure the banana plug is already soldered to your cable and the joint has cooled completely before installing the housing.
• Threading: Feed your speaker wire through the rear circular cable port on the housing's hinged flap.
• Snap & Lock: Place the soldered plug body into the main housing cavity, swing the hinged flap shut, and press until the locking tab snaps into place.
• For Larger Cables: If using cables larger than 2.5 mm, you may gently remove the internal strain relief tabs or operate the housing without the rear flap to accommodate conductors up to 4 mm.