Secure Checkout
Alto Line MKII Speaker Kit

Thumbnail Filmstrip of Alto Line MKII Speaker Kit Images

    Purchase Alto Line MKII Speaker Kit

    SKU: V-5970-Alto-Line Alto Line MKII Speaker Kit

    $745.00 per pair without cabinets
    Brand: Visaton
    Quantity in Basket:  None

     

     



    Visaton Speaker Kit - ALTO LINE MK II
    Art. No. 5970

    Visaton Alto Line MkII - shown assembled with suggested cabinets, not supplied.
    Visaton Alto Line MkII - shown assembled with suggested cabinets, not supplied.

     

    Characteristics and Sound Properties
    The ALTO LINE MK II is a slim, 2-band column speaker with two 13 cm mid-bass units and one dome tweeter. Due to its slim design and the correspondingly small footprint, this model is ideal as a free-standing speaker in smaller rooms. The spatial separation is well handled by the speakers and can, as a result, produce clear sound characteristics even in "normal" living rooms.

    The unusually broad range bass spectrum for a speaker of this size, that remains crisp even at higher output levels, is a point worthy of note.As a result of its balanced, crisp sound characteristics, and the finely detailed, exuberant high-frequency output, the ALTO LINE MK II can be considered a fully-fledged member of the ALTO speaker family.

     

    Technical Specifications

    Rated power 80 W
    Maximum power 130 W
    Nominal impedance Z 4 Ohm
    Frequency response 38-20000 Hz
    Mean sound pressure level 85 dB (1W/1m)
    Cut-off frequency 2300 Hz
    Principle of Housing Bassreflex
    Net volume 30 litres
    Outer dimension height 900 mm
    Outer dimension width 190 mm
    Outer dimension depth 270 mm

     

    Frequency and Impedance Response

    Frequency Response and Impedance Graph
    Frequency Response and Impedance Graph

     

    Exploded Cabinet Drawing

    Exploded Speaker Box Drawing
    Exploded Speaker Box Drawing

     

    Assembly
    Simply glue the boards together (butt-jointed) as shown in the parts list. After that, cut out the openings for the speaker drivers, the bass reflex tube (front) and the terminal connections (rear).

     

    Internal Damping
    The damping of the cabinet uses three mats of damping material rolled loosely, pushed into the cabinet through a bass opening and arranged uniformly above the bass tube.

     

    Component Parts List for Each Box - Supplied with Kit
    The kit comes with all necessary components (see list below for one box), one set if the speaker is an each, or two sets for a pair, see price above for details.

    Tweeter DT 94 - 8 Ohm 1 pc.
    Bass-midrange driver W 130 S - 8 Ohm 2 pcs.
    Crossover ALTO LINE MK II 1 pc.
    Bass reflex tube BR 15.34 (length: 14.7 cm) 1 pc.
    Terminal ST 77 1 pc.
    Damping material Polyester wool 1.5 bags
    Wood screws 3.5 x 19 mm 3 pcs.
    Countersunk screws 3.5 x 25 mm 14 pcs.
    Cable 2 x 1.5 mm² 2 m

     

    Speaker Cabinet Material List to Make 1 Box - Not Supplied with Kit

    Parts for One Box (not supplied) Size (mm) Quantity
    Material: 19 mm chipboard or MDF recommended
    Front and rear panel 862 x 152 2
    Side panel 900 x 270 2
    Top and bottom panel 270 x 152 2
    Braces 60 x 152 2

     

    Speaker Cabinet Dimensions

    Loudspeaker Box Construction Diagram - all dimensions in mm.
    Loudspeaker Box Construction Diagram - all dimensions in mm.

     

    Crossover - Supplied with Kit Already Assembled

    Speaker Kit Crossover Circuit
    Speaker Kit Crossover Circuit