Secure Checkout
Classic 200 Speaker Kit

Thumbnail Filmstrip of Classic 200 Speaker Kit Images

    Purchase Classic 200 Speaker Kit

    SKU: V-5964-Classic200 Classic 200 Speaker Kit

    $2,995.00 per pair without cabinets
    Brand: Visaton
    Quantity in Basket:  None

     

     



    Visaton Speaker Kit - Classic 200
    Art. No. 5964

    Visaton Classic 200 - shown assembled with suggested cabinets, not supplied.
    Visaton Classic 200 - shown assembled with suggested cabinets, not supplied.

     

    Characteristics and Sound Properties
    As the name CLASSIC 200 suggests, this speaker design uses the classic 3-band arrangement: one woofer, one mid-range cone and one dome tweeter, all arranged one above the other close together in the front baffle. The AL 200 - 8 Ohm, TI 100 - 8 Ohm and KE 25 SC - 8 Ohm used here are the best drivers in their respective categories available from the VISATON catalogue. For an upright cabinet, this is relatively small, enabling space-saving use in almost any sitting room.

    The sensitivity of the CLASSIC 200 is excellent for a speaker of this size. This is made possible by the "slim-line" bass tuning. In comparison with the VOX 200, which has almost the same driver arrangement, the lower limiting frequency has been set slightly higher. This will appeal in particular to those who appreciate more "crisp" bass reproduction. The difference is that, in the CLASSIC 200, the low-frequency room resonance which is almost always present in any room, is not excited to the same degree and this reduces the reverberation.

    The other drivers are also without doubt excellent and contribute to a holistic overall sound consisting of precise mid-range and clear as crystal, unobtrusive, smooth-as-silk treble frequencies. Extract from Klang & Ton 05/2005 As one would expect, the Classic 200 produces a very fine sound image across the entire range and this enables one to distinguish fine differences which are simply inaudible with other loudspeakers. At the same time, one is never made to feel that the speaker is trying to force this frank approach on one in an obtrusive manner or invent things which were never there in the original recording. In the low-frequency range, too, the overall sound quality remains clear and well-balanced thanks to the fine tuning. We, who always prefer lively loudspeakers with verve and dynamism, could not fault Visaton's Classic 200, loved every aspect of them - they provided unqualified listening enjoyment.

    Extract from Klang & Ton 05/2005: As one would expect, the Classic 200 produces a very fine sound image across the entire range and this enables one to distinguish fine differences which are simply inaudible with other loudspeakers. At the same time, one is never made to feel that the speaker is trying to force this frank approach on one in an obtrusive manner or invent things which were never there in the original recording. In the low-frequency range, too, the overall sound quality remains clear and well-balanced thanks to the fine tuning. We, who always prefer lively loudspeakers with verve and dynamism, could not fault Visaton's Classic 200, loved every aspect of them - they provided unqualified listening enjoyment.

     

    Technical Specifications

    Rated power 120 W
    Maximum power 180 W
    Nominal impedance Z 8 Ohm
    Frequency response 35-25000 Hz
    Mean sound pressure level 88 dB (1W/1m)
    Cut-off frequency 400 / 2500 Hz
    Principle of Housing Bassreflex
    Net volume 40 + 4 litres
    Outer dimension height 1000 mm
    Outer dimension width 260 mm
    Outer dimension depth 260 mm

     

    Frequency and Impedance Response

    Frequency Response and Impedance Graph
    Frequency Response and Impedance Graph

     

    Exploded Cabinet Drawing

    Exploded Speaker Box Drawing
    Exploded Speaker Box Drawing

     

    Assembly
    The cabinet sections are cut in accordance with the parts list and glued together. Next, the openings and recesses for the loudspeakers and the bass reflex tube (front panel) and terminal connections (rear panel) are cut out.

     

    Internal Damping
    Half a mat of damping material is pushed into the mid-range enclosure. The rest is distributed uniformly in the cabinet, while ensuring that the port of the bass reflex tube is left unblocked.

     

    Component Parts List for Each Box - Supplied with Kit
    The kit comes with all necessary components (see list below for one box), one set if the speaker is an each, or two sets for a pair, see price above for details.

    Tweeter KE 25 SC - 8 Ohm 1 pc.
    Mid-range driver TI 100 - 8 Ohm 1 pc.
    Woofer AL 200 - 8 Ohm 1 pc.
    Crossover Classic 200 1 pc.
    Terminal ST 77 1 pc.
    Bass reflex tube BR 25.50 1 pc.
    Damping Material Polyester wool 2 bags
    Special Wood Screws 4 x 25 mm 18 pcs.
    Countersunk Screws 3.5 x 25 mm 4 pcs.
    Cable 2 x 2.5 mm² 1.5m
    Cable 2 x 1.5 mm² 1.5 m

     

    Bass Reflex Tube Modification

     

    Speaker Cabinet Material List to Make 1 Box - Not Supplied with Kit

    Parts for One Box (not supplied) Size (mm) Quantity
    Material: 19 mm chipboard or MDF recommended
    Front and rear panel 1000 x 260 2
    Side panels 1000 x 222 2
    Top and bottom panels 222 x 222 2
    Mid-range rear panel 290 x 222 1
    Mid-range bottom panel 65 x 222 1
    Brace 80 x 222 2

     

    Speaker Cabinet Dimensions

    Loudspeaker Box Construction Diagram - all dimensions in mm.
    Loudspeaker Box Construction Diagram - all dimensions in mm.

     

    Crossover - Supplied with Kit Already Assembled

    Speaker Kit Crossover Circuit
    Speaker Kit Crossover Circuit