Art. No. 135020 cm (8") High-end full-range loudspeaker. These high-end speakers stand out because of their high degree of sensitivity and extremely well-balanced frequency response free of noticeable deviations. This is achieved by using a very light-weight paper cone, a fabric surround and an optimised driver equipped with a 25 mm voice coil which makes optimum use of the magnetic field in the air gap. The capton voice coil carrier is vented. The sturdy aluminium diecast basket is not only optically appealing but, thanks to its rear-venting openings, ensures that physical losses are minimised. Distortion is suppressed to a very low, uniform level.
The B 200 is ideally suited to use in high-quality, powerful single-band speakers, where the cabinet design need not be restricted to classic, fully enclosed or vented cabinets, but more exotic alternatives like horns or open baffles can be used to create amazing results. Used in:
NoBox BB
QUADRO
SOLITUDE
SOLO 100
SOLO 20
SOLO 50
SOLO Eckbox
Accessories:
KM 140
| 
| 
waterfall spectrum
Frequency and impedance response - click.
| | Technical Data: |
|---|
| Rated power | 40 Watt | | Maximum power | 70 Watt | | Nominal impedance | 6 Ohm | | Frequency response (-10 dB) | fu - 18000 Hz | | (fu: Lower cut-off frequency depending on cabinet) | . | | Mean sound pressure level | 96 dB (2,83V / 1m) | | Maximum linear displacement | +/- 3,5 mm | | Resonance frequency fs | 40 Hz | | Magnetic induction | 1,2 Tesla | | Magnetic flux | 755 µWeber | | Height of front pole-plate | 8 mm | | Voice coil diameter | 25 mm | | Height of winding | 4 mm | | Cutout diameter | 190 mm | | Net weight | 2,16 kg | | D.C. resistance Rdc | 5,0 Ohm | | Mechanical Q factor Qms | 8,39 | | Electrical Q factor Qes | 0,83 | | Total Q factor Qts | 0,75 | | Equivalent volume Vas | 102 l | | Effective piston area Sd | 214 cm2 | | Dynamically moved mass Mms | 9,7 g | | Force factor Bxl | 3,9 T m | | Inductance of the voice coil L | 0,5 mH |
| Similar products |
|---|
| BG 20 8 OHM | |
| |
|
