Voltage Booster Converter 12V to 24V DC 10 Amp Max

Voltage Booster 12V to 24V DC 10 Amp Continuous / 12 Amp Max (288W)

Operate 24 Volt DC equipment smoothly and safely from a nominal 12 Volt negative ground electrical system. Beyond automotive and commercial vehicle use, this versatile step-up DC-to-DC voltage converter is equally suited for industrial electronics, marine accessories, solar energy setups, and heavy equipment. It allows you to run standard 24V DC equipment seamlessly from any standard 12V (9V to 20V input range) negative ground supply.

Because the unit uses a common ground architecture, external ground isolation is unnecessary. Built with high-efficiency switch-mode components, power conversion efficiency exceeds 95%, ensuring current draw remains negligible when no output load is active.

Housed in a compact, durable enclosure, this 288W boost regulator provides long-term voltage stability and reliable operation. Whether applied in cars, trucks, machinery, solar energy systems, remote monitoring stations, or hobbyist electronics, it delivers clean and stable power.

Key Features & Specifications:

• Input Voltage Range: 9V to 20V DC (nominal 12V input)
• Output Voltage: 24V DC nominal
• Output Current: 10A continuous
• Peak Output Current: 12A max
• Continuous Power Output: 288W max
• Conversion Efficiency: Greater than 95%
• Output Ripple: ≤40mV
• Operating Temperature Range: -40°C to +85°C (industrial grade)
• Dimensions: 74 x 74 x 32 mm (approx. / net weight 0.3 kg)
• Integrated Protection: Input transient high-voltage protection, output over-current protection, and internal thermal / overheating shutdown

Common Applications (Vehicles & Electronics):

• Commercial 24V vehicle electronics, radios, and communication equipment
• Automotive and marine LED lighting, auxiliary spotlights, and display screens
• GPS navigation, tracking units, vehicle security alarms, and monitoring systems
• 24V electric fans, motors, fluid pumps, air conditioning controls, and actuators
• Solar energy panels, photovoltaic setups, hobbyist projects, and general industrial DC equipment

Wiring Lead Connections:

• Input (12V Supply Source): Positive - Red wire ; Chassis / Negative / Ground - Black wire
• Output (24V Equipment): Positive - Yellow wire ; Chassis / Negative / Ground - Black wire

Note: Please ensure the voltages are measured to be correct before connecting to the device that is to be supplied the power. This unit must be installed in a clean, dry location protected from moisture and direct water exposure. It is strongly recommended to install appropriate inline fuses on both the input and output positive lines to protect the module and connected accessories against external circuit faults. Professional installation is recommended. An instruction manual is included with the product.