Dynavin MOST Fibre Optic Amplifier Interface - for Mercedes Harman Kardon, Porsche Bose and BMW Logic7 Systems
This adaptor is designed for fitting other brands of after-market head units to vehicles that have factory "MOST25" fibre optic amplifiers installed, when your new head unit only has RCA outputs. It can also be used for direct connection to Dynavin N6 and N7 Navigation systems for Mercedes, Porsche and BMW. It supports the factory original MOST amplifier by fibre optical link, however it does not work with later MOST versions such as MOST50 or MOST150, or with the older D2B amplifiers. It is stereo left and right only, though all speakers should operate in most cases.
Why You Need This Interface:
- Keep Your Factory Amplifier: Lets a new head unit work with the original Harman Kardon, Bose or Logic7 amplifier and speakers, so you can still use the original amplifier.
- For RCA Output Head Units: Connects pretty much any brand of after-market head unit that has RCA outputs to the factory MOST25 fibre optic amplifier.
- Simple Connections: The loom has left and right RCA inputs, a chassis ground, an accessory lead and a 12V permanent lead.
- Connection Adaptor Included: A MOST fibre optic cable adaptor connector suits various types of MOST car fibre optic connections.
- Dynavin Compatible: For Dynavin N6 and N7 systems, the module connects to the supplied Dynavin cables.
Example Systems:
- After-market head units with RCA outputs, from other brands such as Alpine, Pioneer, Sony, Clarion, Kenwood, JVC, Blaupunkt, and many others
- Mercedes (Harman Kardon)
- Porsche (Bose)
- BMW (Logic7 or sound package)
- Dynavin N6 and N7 systems - module usually connects to supplied cables
Connections:
- 8-pin connector from the module to the power and audio loom
- Left and right RCA inputs from the new head unit
- Black wire: ground to the vehicle chassis
- Red wire: accessory (ACC) switched 12V
- Yellow wire: 12V permanent
- MOST fibre optic connection to the factory amplifier
Compatible Vehicles - please check with us if in doubt:
For vehicles with a factory stand-alone Harman Kardon (Mercedes), Bose (Porsche) or Logic7 (BMW) MOST25 sound system only. Not suitable for Mercedes-Benz systems with Audio Gateway, see our other module for this.) Mercedes with Harman Kardon:
- A-Class (W169)
- B-Class (T245)
- C-Class (W203 facelift, W204 pre-facelift)
- CLK (W209, facelift only)
- CLS (NTG2.5 system facelift only)
- E-Class (NTG 2.5 system facelift only)
- G-Class
- GL (X164)
- ML (W164)
- R-Class (W251)
- S-Class (W220 - not all systems)
- SL (R230)
- SLK (R171, NTG2.5 system facelift only)
Mercedes factory systems: not suitable for NTG1 systems, only NTG2.5 and NTG4.0.
Porsche with Bose sound systems: all models, including 911, Boxster, Cayman, Cayenne and others.
BMW with a MOST25 Logic7 sound system or sound package (MOST fibre optic line, no speaker cable): all BMW since approximately 2004: E60, E90, and E87.
Compatible Head Units:
- Pretty much any brand of after-market head unit that has RCA outputs; Alpine, Kenwood, Pioneer, Clarion, Sony, JVC, Blaupunkt and more.
- Dynavin N6 and N7 navigation systems
Important Compatibility Check:
This interface is only for vehicles with a factory Harman Kardon, Bose or Logic7 MOST25 fibre optic amplifier. It does not work with later MOST versions such as MOST50 or MOST150, with the older D2B amplifiers, or with vehicles that have no factory amplifier. The interface does not provide CAN signals. Mercedes with an Audio Gateway (pre-facelift E-Class, CLS and SLK) need a different adaptor. Please check your vehicle, sound system and head unit before ordering, and ask us if you are unsure. We recommend having the product installed by a specialist installer.
How to Tell MOST25 from D2B:
Check the vehicle fibre optic connector before ordering. A straight connector is MOST25. A bent connector is D2B, which this interface does not support. Most Mercedes before 2004 are D2B.
Please Note:
As with other after-market head unit installations, the factory amplifier fader cannot be controlled from the new head unit, and a factory CD changer will no longer work. All speakers should operate in most cases.
Specifications:
- Dynavin part numbers: DVN MOPC (Mercedes and Porsche), DVN MOLO7 (BMW)
- Type: MOST25 fibre optic amplifier adaptor
- Connection: via 8-pin connector
- The 6-pin socket on the back of the module is not used
- Inputs: left and right RCA
- Audio: stereo left and right only
- Not compatible with MOST50, MOST150 or later, or D2B amplifiers
- Does not provide CAN signals
Included:
- Interface module box
- MOST fibre optic cable adaptor connector to suit various types of MOST car fibre optic connections - you will either plug straight in or pull apart the vehicle connector.
- Power and audio loom for other brands of head unit, which is not needed for Dynavin units in most cases.