Blaupunkt Classic 165 Cs 6.5" (165mm) 2-Way Component / Split Speakers
The Blaupunkt Classic 165 Cs is a 2-way component speaker set with separate woofers, tweeters and crossovers, designed to suit both classic cars and modern vehicles. The understated pure black design looks at home in an older interior, while the neodymium magnets keep the mounting depth to just 44.4mm, so they can be fitted in many vehicles without cutting or modifying the door or trim.
The supplied metal grilles can be left blank, or fitted with either the retro or modern Blaupunkt badge, or the speakers can be installed without the grilles if you prefer a more original look, such as behind factory grilles. The tweeters come with three mounting options, so they can be flush mounted or surface mounted at an angle to aim them towards the listener.
Features:
- 2-way component system with separate woofer and tweeter crossovers
- 165mm (6.5") woofer with coated cellulose (paper) cone and rubber surround
- 25.5mm (1") silk dome tweeter
- Neodymium magnets on both woofer and tweeter
- Shallow 44.4mm mounting depth
- Gold plated connectors
- Metal grilles with a choice of no badge, retro or modern Blaupunkt badges (included)
- Tweeter can be flush mounted, or surface mounted at 30° or 60°
- Tweeter connections are not polarity protected, so the tweeter phase can be reversed if needed to suit its position in the vehicle
- Classic pure black design
Specifications:
- System: 2-way component
- Size: 165mm (6.5")
- Nominal power handling: 60W
- Maximum power handling: 120W
- Impedance: 4 Ohms
- Frequency response: 60Hz - 20kHz
- Sensitivity: 90dB (2.83V/1m)
- Woofer cone: coated cellulose (paper), black
- Woofer surround: rubber, black
- Woofer voice coil: 35.5mm (1.4") Kapton, 2 layers
- Woofer basket: steel, black
- Tweeter: 25.5mm (1") silk dome with 25.5mm aluminium voice coil, 2 layers
- Magnets: neodymium (woofer and tweeter)
- Speaker connectors: 2.8mm and 4.8mm spade terminals
- Grille: metal, black, with ABS cover ring
Dimensions (approx.):
- Woofer outer diameter: 165.3mm
- Cut-out diameter: 142mm
- Mounting depth: 44.4mm
- Overall depth including flange: 50.6mm
- Magnet diameter: 78mm
- Mounting hole circle diameter: 157mm
- Grille diameter: 179.5mm
- Grille height: 15.5mm
- Tweeter outer diameter: 43.6mm
- Tweeter overall depth: 25mm
- Woofer weight: 530g each
- Tweeter weight: 68g each
Supplied:
- 2 x 165mm woofers
- 2 x 25.5mm tweeters
- 2 x woofer crossovers and 2 x tweeter crossovers
- 2 x metal design grilles with plastic mounting rings
- 2 x retro badges and 2 x modern badges
- 2 x packs of anti-vibration adhesive strips for the grilles
- 2 x 3m speaker cables
- 2 x angled tweeter mounts (30° or 60°)
- 2 x flat tweeter mounting rings
- 2 x dual ear tweeter brackets
- 14 x fixing screws
- 8 x speaker mounting clips
- Inline wire crimp connectors
- Printed installation manual
The cut-out template is printed on the box.
Please check the dimensions against your vehicle before purchasing. Professional installation is recommended.