Secure Checkout

Subaru OEM Upgrade 6.5 Inch 4 Ohm Stereo Speakers

Thumbnail Filmstrip of Subaru OEM Upgrade 6.5 Inch 4 Ohm Stereo Speakers Images

    Purchase Subaru OEM Upgrade 6.5 Inch 4 Ohm Stereo Speakers

    Subaru OEM Upgrade 6.5 Inch 4 Ohm Stereo Speakers

    $125.00 per pair
    SKU: speakers-car-audio-subaru-oem-replacement-6-5inch
    Size (D, DxL or WxLxH): 6.5" (165 mm)
    Quantity in Basket:  None
     
    256-Bit SSL Secure Checkout



    Stock Status: Local stock - dispatches in 1-2 business days.
    Warranty: Australian warranty, expert advice & tech support.
    Shipping: Regular or express, plus tracked options at checkout.
    Fulfilment: Shipped from Australia by us, a 100% local business.
    Questions? Call or email us - see our contact page & FAQ.

    Subaru GT-652TYT OEM-Style 6.5" Coaxial Upgrade Door Speakers (Base / Non-Amplified Systems)

    Upgrade your Subaru door speakers with these high-quality, performance direct-fit stereo speakers. Designed and manufactured as direct factory replacements for the listed vehicles, they are engineered to fit the original mounting points and wiring plugs. No drilling or splicing is normally required. Please check the dimensions below against your original speakers before ordering.

    Compatibility & Fitment Notes:

    • Base Audio Only: These speakers are designed exclusively for standard, non-amplified factory audio systems. They are not suitable replacements for vehicles equipped with factory high-end premium sound systems.
    • Check Your Layout: Vehicles can have different factory variations or prior modifications. Please compare the key dimensions below, and the full dimensions further down this page, with your original speaker to guarantee a proper fit before purchasing. These are not replacements for factory angled-mount speakers.

    Key Dimensions - Check Before Ordering (approx.):

    • Outer diameter: 174mm (excluding protrusions)
    • Mounting hole centres: 180mm from the top hole to the bottom holes (the bottom is where the plug is)
    • Mounting hole centres: 167mm between the bottom holes
    • Mounting hole diameter: 7mm
    • Mounting depth from the bottom seal: 44mm
    • Total height: 73mm
    • Flat mount (non-angled mount)

    The full list of dimensions is further down this page, under Dimensions.

    How to Check Your Fit:

    • Measure your original speaker's outer diameter, mounting hole spacing and mounting depth, and compare them with the key dimensions above.
    • Check that your original speaker is a flat mount, not an angled mount.
    • Check that your original speaker plug looks like the plug socket on these speakers (18mm wide, 8mm high).
    • If you are unsure, please contact us before ordering.

    Fits the following Subaru vehicles (always verify against your original speaker dimensions to ensure accurate fitment):

    • Crosstrek (2014-2019)
    • Forester III (2008-2013)
    • Forester IV (2016-2018)
    • Impreza IV (2014-2019)
    • Outback IV (2012-2014)
    • Outback V (2015-2019)
    • WRX (2014-2019)

    Vehicle Not Listed, or Not Sure?

    The vehicle list above is based on the speaker manufacturer's compatibility data, and factory fitment can vary by market, model and year. If your vehicle is not listed, these speakers may still suit if the dimensions match, but we cannot guarantee it. Please measure your original speaker against the key dimensions above, or contact us with your vehicle details and we will help you check before you order.

    Features and Specifications:

    • Power: 35W RMS
    • Peak power: 210W
    • Nominal size: 6.5 Inch
    • Impedance: 4 Ohm
    • Frequency Response: 70Hz - 20kHz
    • Sensitivity: 90dB ±3dB @ 1W/1m
    • Voice Coil: 25.5mm diameter, ASV (aluminium heat resistant)
    • Magnet Mass: 227g
    • Tweeter: 13mm neodymium
    • Supplied as a pair (two)
    • Flat mount (non-angled mount)

    Dimensions (approx.):

    • Outer diameter 174mm (excluding protrusions)
    • Top foam seal diameter: 156mm
    • Internal width of plug socket: 18mm
    • Internal height of plug socket: 8mm
    • Width of mounting tabs: 34mm
    • Total height: 73mm
    • Centre to centre from top hole to bottom holes (bottom is where the plug is): 180mm
    • Centre to centre between bottom holes (bottom is where the plug is): 167mm
    • Mounting hole diameter: 7mm
    • Rear raised lip / collar (partial/semi-circular): 158mm diameter / 25mm maximum height (tapered as per image; can be trimmed or removed if required for clearance)
    • Mounting depth from bottom seal: 44mm
    • Magnet diameter: 79mm