Monacor CP-20 DIN - Flat and Round Pin - Speaker Plugs

Monacor CP-20 DIN Speaker Plugs (Pair)
Part No.: 0141640

Description:

A pair of 2-pin DIN speaker plugs suitable for older style car radio and amplifier systems. Great for older Becker car radio speaker cables. Simple screw clamp connection, no solder required, making them quick to fit to a new or repaired speaker lead.

Key Features:

• No Solder Required: Simple screw clamp connection, so you only need a screwdriver to fit them.
• Short Circuit Protection: Plastic inserts help protect against short circuits.
• Keyed 2-Pin Plug: A DIN speaker plug has one round pin and one flat pin, so it can only be plugged in one way and polarity stays correct.
• Suits Common Speaker Cable: Takes wire up to 3mm in diameter (4mm²).
• Sold as a Pair: Two plugs per pack.

Typical Uses:

• Replacing damaged or missing speaker plugs on older car radios and amplifiers.
• Making up new speaker leads for radios with a 2-pin DIN speaker socket.
• Restoration projects where the original speaker plugs are worn or broken.
• Connecting vintage radios, such as older Becker radios, to speakers.

Specifications:

• Manufacturer: Monacor
• Model: CP-20
• Part No.: 0141640
• Type: 2-pin DIN speaker plug
• Connection: Screw clamp
• Wire capacity: Up to 3mm diameter / 4mm²
• Dimensions: 10.5 x 10.5 x 10.3 (W x H x D excluding pins) approx.
• Weight: Approx. 5g

Includes:

• 2 x DIN speaker plugs, one red, one black (1 pair)

Installation Tips:

• Strip the speaker wire to suit the plug, twist the strands tightly and keep any stray strands away from the other terminal.
• Tighten the screw clamps firmly, but do not over-tighten, so the wire is not cut.
• Keep the polarity consistent on both channels. On a DIN speaker plug the round pin is normally positive and the flat pin negative, but please check the markings on your radio.

Check Before Ordering:

• Check that your radio or amplifier has a 2-pin DIN speaker socket.
• Check that your speaker wire is within the 3mm diameter limit.

Becker speaker connection example on rear of radio, radio not supplied.