Price includes 10% GST. Tax deducted at checkout for overseas shipments.
Description: Beijer CANBUS BCI-2 Speed and Power Interface
Beijer Automotive BCI-2 Speed Signal Pulse Output and Vehicle Power On Output
The BCI-2 is a truly universal CAN interface. It supports over 500 cars makes and models with a CAN Bus system. The BCI-2 is a truly universal CAN interface. It supports many makes and models with a CAN Bus system as listed below. This means that only one unit is required as it covers all the vehicles listed without any extra programming! Note that once installed, it is locked to that vehicle. We can reprogram them if required at additional cost. Connecting a BCI is quick and easy. Once connected to a constant power supply (12V / 24V DC), a ground and two CAN wires, the BCI will automatically determine the car make and type, after which it will send normal analogue style signals to the relevant outputs. Plus with the help of the free in-car instruction via an Internet login that comes with every BCI, locating the CAN connections in the car is easy too from the huge online database.
Outputs (Vehicle dependant, see list below):-
Speed pulse
Switched power supply (also may be called accessories / ignition depending on the car system)
Beijer BCI CAN BUS interfaces, one unit covers all the listed vehicles!
Specifications:-
Power Supply: 7.5V DC to 32V DC
Maximum current consumption (unloaded): Normal mode: < 80mA ~ 12/24V
Sleep mode: < 1.5 mA ~ 12V / 24V
Outputs: all outputs are protected against short-circuit to power supply and ground.
Digital Outputs VSupply:
Voltage range: VSupply from 7.5V to 32V
Pull-down to ground
Max. current: 500mA per output
Thermal protection
Frequency Output:
VSupply from 7.5V to 32V
Max. freq. 2 kHz
Max. current: 50mA/output
Note: pull down to ground is a digital low signal, not directly connected to ground / chassis.
Temperature: Operating temperature: -40 °C / +85 °C
