Local Stock - Fast Order Processing
Sign In About Us Contact Us Frequent Questions
(02) 4872-1553
or 0411 881 967
0
Product Search
    0
    Secure Checkout
    22mm TW022WA06 Ferrite Magnet Dome 4 Ohm Ferro Fluid

    Thumbnail Filmstrip of 22mm TW022WA06 Ferrite Magnet Dome 4 Ohm Ferro Fluid Images

      Purchase 22mm TW022WA06 Ferrite Magnet Dome 4 Ohm Ferro Fluid

      SKU: Wavecor-Tweeter-TW022WA06-01 22mm TW022WA06 Ferrite Magnet Dome 4 Ohm Ferro Fluid

      $65.00 each
      Brand: Wavecor
      Quantity in Basket:  None

       

       


      Wavecor Speaker Driver - TW022WA06 - 22mm Textile Tweeter Ferro Fluid Low Resonance - 4 Ohm

      Description
      TW022WA06 is a tweeter designed for applications requiring the highest level of performance and most extended and linear high frequency response. Tweeters used to feature a separate rear chamber in order to obtain low resonance frequency. Not any longer! By designing the internal parts to accommodate new larger internal volumes, the TW022WA06 offers an unusually low resonance frequency. The design with 22 mm voice coil and wide surround caters for both applications that would normally require traditional 3/4" tweeters and those, where 1" tweeters would usually be used.

       

      Features

      • 22 mm design for optimal compromise between on- and off-axis frequency response, resonance frequency and power handling
      • Internal volumes for low resonance frequency and distortion
      • Precision-coated textile diaphragm for improved consistency and high-frequency extension
      • Optimised dome shape for ultra high frequency cutoff
      • Vented voice coil former for reduced distortion and compression
      • Copper-clad aluminium voice coil wire offering lower moving mass for improved efficiency and transient response
      • Build-in cavities under dome/edge to equalise pressure for lower distortion and lower resonance frequency
      • Light high-stability ferro fluid for increased power handling
      • Flexible lead wires for higher power handling and larger excursion
      • Gold plated terminals to prevent oxidation and ensure long-term reliable connection
      • Delivered with foam gasket attached for hassle-free mounting and secure cabinet sealing

       

      Frequency SPL and Impedance Response Graphs

      Loudspeaker Frequency Response Graph
      Loudspeaker Frequency Response Graph
      Measuring conditions, SPL
      Driver mounting: Flush in infinite baffle
      Microphone distance: 1.0 m
      Input level: 2.83 VRMS
      Smoothing: 1/6 oct.

       

      Loudspeaker Impedance Response Graph
      Loudspeaker Impedance Response Graph
      Measuring conditions, impedance
      Driver mounting: Free air, no baffle
      Input signal: Stepped sine wave, semi-current-drive, nominal current 2 mA
      Smoothing: None

       

      Technical Specifications

      Notes Parameter Value Unit
        Nominal size 22 mm
        Nominal impedance 4 Ohm
        Recommended frequency range
      		 2 - 25 kHz
      1, 4 Sensitivity, 2.83V/1m (average SPL in range 2.5 - 20 kHz) 90.5 dB
      2 Power handling, short term, IEC 268-5, 2 kHz @ 12dB/oct. - W
      2 Power handling, long term, IEC 268-5, 2 kHz @ 12dB/oct. 150 W
      2 Power handling, continuous, IEC 268-5, 2 kHz @ 12dB/oct. 40 W
      6 Effective radiating area, Sd 6.1 cm2
      3, 4 Resonance frequency (free air, no baffle), Fs 750 kHz
      7 Moving mass, incl. air (free air, no baffle), Mms 0.30 g
      3 Force factor, Bxl 1.9 -
      3, 4 Suspension compliance, Cms 0.15 mm/N
      3, 4 Equivalent air volume, Vas 0.0079 ml
      3, 4 Mechanical resistance, Rms 0.57 Ns/m
      3, 4 Mechanical Q, Qms 2.5 -
      3, 4 Electrical Q, Qes 1.45 -
      3, 4 Total Q, Qts 0.92 -
      4 Voice coil resistance, RDC 3.7 Ohm
      5 Voice coil inductance, Le (measured at 20 kHz) 36 uH
        Voice coil inside diameter 22 mm
        Voice coil winding height 1.8 mm
        Air gap height 2.5 mm
        Theoretical linear motor stroke, Xmax ±0.35 mm
        Magnet weight 140 g
        Total unit net weight excl. packaging 0.35 kg
      3, 5 Krm 0.0083 mOhm
      3, 5 Erm 1.03 -
      3, 5 Kxm 1.04 mH
      3, 5 Exm 0.67 -
      Note 1: Measured in infinite baffle.
      Note 2: Tested in free air (no cabinet, no baffle).
      Note 3: Measured using a semi-constant current source, nominal level 2 mA.
      Note 4: Measured at 25°C.
      Note 5: It is generally a rough simplification to assume that loudspeaker transducer voice coils exhibit the characteristics of an inductor. Instead it is a far more accurate approach to use the more advanced model often referred to as the "Wright empirical model", also used in LEAP-4 as the TSL model, involving parameters Krm, Erm, Kxm, and Exm.
      Note 6: Calculated as the area inside the middle of the surround
      Note 7: Determined by physical weighing of the moving parts including the inner half of the surround.

       

      Driver Nominal Dimensions

      Loudspeaker Driver Dimensions and Measurements - all dimensions in mm (approx.)
      Loudspeaker Driver Dimensions and Measurements - all dimensions in mm (approx.)

       

      Terminal Nominal Dimensions

      Loudspeaker Driver Terminal Dimensions and Measurements - all dimensions in mm (approx.)
      Loudspeaker Driver Terminal Dimensions and Measurements - all dimensions in mm (approx.)
      Thickness, both terminals: 0.5 mm
      Terminal plating: Gold