SKU: Voltage-Booster-6-12VDC Voltage Booster 6 to 12V DC 10 Amp Max

Voltage Booster 6 to 12V DC 10 Amp Max

If you have an old car with a low voltage battery such as 6V or 8V and a normal negative ground chassis, then you will need one of these to run modern equipment. This device will allow the operation of standard 12 Volt DC accessories from a nominal 6V (5V to 11V) negative ground electrical system. The voltage converter uses a common ground, so isolation is not necessary and because of its efficient design, the current draw is negligible when no load is applied.

Voltage Booster Dimensions.

This is a 120W step-up converter / booster / car voltage converter / power adaptor in a compact size with high efficiency and long term stability. Easy installation and use. Especially suitable for use in vehicles such as classic cars and tractors that still run a 6V electrical battery system; but also for other electronic equipment, industrial equipment, LED lights, LCD screens, monitoring systems, hobbyist projects and more.

• Input Voltage: 5V to 11V DC
• Output Voltage: 12V DC nominal
• Output Current: 10A
• Peak Output Current: 12A max
• Power: 120W
• Conversion Efficiency: more than 93%
• Power Consumption: 42mA @ 6V input, no load
• Ripple: 40mV
• Temperature Range: -40°C to +85°C
• Dimensions: 78 x 74 x 32 mm (approx.)
• Protection: input transient high voltage protection, output over current protection, chip overheating protection
• Applications: car alarms, radios, CB and UHF radios, audio systems, navigation, monitoring, vehicle mounted LED display screens, solar energy, LED lights, pumps, and industrial electrical equipment, etc.

Wiring Connections:

• Input: Positive: Red; Chassis/Negative/Minus/Ground: Black
• Output: Positive: Yellow; Chassis/Negative/Minus/Ground: Black
• It is highly recommended to fuse the device on both the input and the output.