Local Stock - Fast Order Processing
Secure Checkout
Effect 130 Speaker Kit'

Thumbnail Filmstrip of Effect 130 Speaker Kit' Images

    Purchase Effect 130 Speaker Kit'

    SKU: V-8430-Effect130 Effect 130 Speaker Kit'

    $130.00 Currently Not Available
    Brand: Visaton
    Quantity in Basket:  None

     

    Sorry, we are currently sold out of:
    Effect 130 Speaker Kit'.
    More stock is due soon!
     


    Visaton Speaker Kit - Effect 130
    Art. No. 8430

    Visaton Effect 130 Speaker Kit - shown assembled with suggested cabinets, not supplied.
    Visaton Effect 130 Speaker Kit - shown assembled with suggested cabinets, not supplied.

     

    Characteristics and Sound Properties
    The EFFECT 130 is a Dolby® Surround effect speaker and can easily be used in conjunction with a CENTER 130 or other system. Thanks to the magnetically shielded SC 13 8 ohm driver, the system will be able to achieve the sound volumes required for clear reproduction of Dolby® Surround effects even in larger rooms.

    When Dolby® Surround signals are encoded, the upper frequency range is topped off at 7000 Hz, which is why the SC 13 8 ohm speaker, which remains linear up to around 10 kHz, is ideally suited to this application. In order to achieve spatial surround effects irrespective of the seating position, the SC 13 8 ohm has been designed to radiate the sound upwards.

    The EFFECT 130 speakers can be located either freely around the room or mounted on the wall, where this should be behind or to the side of the seating position.

     

    Technical Specifications

    Rated power 80 W
    Maximum power 120 W
    Nominal impedance Z 8 Ohm
    Frequency response 70-10000 Hz
    Mean sound pressure level 88 dB (1W/1m)
    Principle of Housing Closed
    Net volume 4 litres
    Outer dimension height 250 mm
    Outer dimension width 160 mm
    Outer dimension depth 160 mm

     

    Frequency and Impedance Response

    Frequency Response and Impedance Graph
    Frequency Response and Impedance Graph

     

    Exploded Cabinet Drawing

    Exploded Speaker Box Drawing
    Exploded Speaker Box Drawing

     

    Assembly
    The EFFECT 130 cabinet consists of 6 boards stuck together (butt jointed), making construction a simple matter. However, it is essential to work accurately since the front grille will not fit in the opening if the tolerances are too great. The grille has the following outer dimensions: 136 x 136 mm. A 10 mm wide slot at the bottom of one side wall is for the cables.

     

    Internal Damping
    Half a mat of damping material is loosely pushed into the cabinet.

     

    Component Parts List for Each Box - Supplied with Kit
    The kit comes with all necessary components (see list below for one box), one set if the speaker is an each, or two sets for a pair, see price above for details.

    Full-range speaker SC 13 - 8 Ohm 1 pc.
    Protective grille Grille Effect 130 1 pc.
    Terminal ST 77 1 pc.
    Damping material Polyester wool 1/4 bags
    Wood screws 3.5 x 19 mm 4 pcs.
    Countersunk screws 3.5 x 25 mm 4 pcs.
    Cable 2 x 1.5 mm² 0.5 m

     

    Speaker Cabinet Material List to Make 1 Box - Not Supplied with Kit

    Parts for One Box (not supplied) Size (mm) Quantity
    Material: 12 mm chipboard or MDF recommended
    Side panels 136 x 250 2
    Side panels 160 x 250 2
    Bottom panel 136 x 136 1
    Material 16 mm chipboard or MDF
    Baffle 136 x 136 1

     

    Speaker Cabinet Dimensions

    Loudspeaker Box Construction Diagram - all dimensions in mm.
    Loudspeaker Box Construction Diagram - all dimensions in mm.