Alto Line

Our Price: AU $375.00 inc. GST per pair without cabinets
AU $340.91 export price per pair without cabinets

Product Code: V-5970

This item is listed in the following categories:
2 Way Speakers, Floorstanding, Visaton Kits

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5970

Characteristics - Sound Properties

The ALTO LINE is a slim, 2-band column speaker with two 13 cm mid-bass units and one dome tweeter.
Due to its slim design and the correspondingly small footprint, this model is ideal as a free-standing speaker in smaller rooms.
The spatial separation is well handled by the speakers and can, as a result, produce clear sound characteristics even in "normal" living rooms.
The unusually broad range bass spectrum for a speaker of this size, that remains crisp even at higher output levels, is a point worthy of note.
As a result of its balanced, crisp sound characteristics, and the finely detailed, exuberant high-frequency output, the ALTO LINE can be considered a fully-fledged member of the ALTO speaker family.

Accessories

Protective grille:	NG 5"	for W 130 S	2 pieces

Similar products
ALTO GENESIS SAT	ALTO GENESIS SUB
ALTO I	ALTO II
ALTO III C	EXPERIENCE V 20
STARLET

Technical Data:
Rated power	80 W
Maximum power	130 W
Nominal impedance	4 Ohm
Frequency response (-10 dB)	33 - 22000 Hz
Mean sound pressure level	83 dB (1 W/1 m)
Cut-off frequency	3000 Hz
Principle of Housing	Bass Reflex
Net volume	30 l
Outer dimension height	900 mm
Outer dimension width	190 mm
Outer dimension depth	270 mm

Frequency response

Construction

Simply glue the boards together (butt-jointed) as shown in the parts list. After that, cut out the openings for the speaker drivers, the bass reflex tube (front) and the terminal connections (rear).

Inner damping

The damping of the cabinet uses three mats of damping material rolled loosely, pushed into the cabinet through a bass opening and arranged uniformly above the bass tube.

Component parts list for 1 box

The kit includes all necessary components (see list below). Cabinet parts are not included.

Tweeter:	DT 94 8 Ohm	1 piece
Bass-midrange driver:	W 130 S 8 Ohm	2 pieces
Crossover:	"Alto Line"
Bass reflex tube:	BR 15.34 (length: 14,7 cm)	1 piece
Terminal:	ST 77	1 piece
Damping material:		1,5 bags
Wood screws:	3,5 x 19 mm	3 pieces
Countersunk screws:	3,5 x 25 mm	14 pieces
Cable:	2 x 1,5 mm²	2 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	862 x 152	2
Side panel	900 x 270	2
Top and bottom panel	270 x 152	2

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Order by phone: (02) 4627-8766 or 0411-88-1967

Offices in Sydney and Melbourne

General enquiries: +61 (0)2 4627-8766 or 0411-88-1967; email us: info@soundlabsgroup.com.au