Construction
The cabinet body uses 16 mm boards. First of all, cut the holes in the boards and apply the bevels. This can be done using an electric jigsaw or hand-held circular saw set to the required angle. Once the cabinet has been completed, apply the milling work for the loudspeaker. Finally, fit the cones.
Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. It can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable. Inner damping
The damping material is loosely arranged in the cabinet. | Component parts list for 1 box | | | | The kit includes all the components listed here but not the cabinet. | | | | Tweeter: | G 20 SC 8 Ohm | 1 piece | | Woofer: | W 100 S 8 Ohm | 1 piece | | Crossover: | Crossover ARIA LIGHT | | | Bass reflex tube: | BR 6.8 (full length) | 1 piece | | Terminal: | ST 77 | 1 piece | | Damping material: | Polyester wool | 1/4 bag | | Countersunk screws: | 3,5 x 25 mm | 13 pieces | | Cable: | 2x 1,5 mm2 | 0,75 m | | | ............... |
| Cabinet parts list for 1 box | | | | Parts | Size (mm) | Quantity | | | | Material: 16 mm MDF or chipboard | | Front, rear panel | 270 x 160 | 2 | | Side panel | 270 x 128 | 2 | | Top, bottom panel | 128 x 128 | 2 |
| 
