Atlantis

Our Price: AU $1,595.00 inc. GST per pair
AU $1,450.00 export price per pair

Product Code: V-5950

This item is listed in the following categories:
Visaton Kits, Floorstanding, 3 Way Speakers

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5950

Characteristics - Sound Properties

The ATLANTIS has been consistently designed for optimum sound-pressure rating while retaining a moderately sized cabinet and an elegant appearance. In the bass range, two AL 170 8 OHM are mounted in parallel but in separate housings, where each has about 25 l of air space to itself.
Compared with the 'normal' AL 130 8 OHM, the AL 130 M 8 OHM is equipped with a shorter voice coil. This improves efficiency and makes it the ideal choice in this combination.
Used as a tweeter, the KE 25 SC 8 Ohm is activated from 2500 Hz.

Similar products
CASABLANCA MK IV	CLASSIC 200
CONCORDE MK II	COUPLET
COUPLET CENTER	VIB 130 TL
VIB 170 AL	VIB 2000 GF

Extract from Hobby HiFi

"In the listening test, the ATLANTIS impressed us with its subtle self-control.
This does not mean that the ATLANTIS has anything to hide, though. Finer details are reproduced with such self-assuredness that they do not leap out at one but blend in well with the music. Bass lines with clearly defined plasticity? No problem! Tangible voices straight from the diaphragm? Of course. Precision-made width and range layering? No sooner said than done.
VISATON's speaker of the year, fitted with the company's top-of-the-range fit-it-yourself driver, absolutely simple to set up and designed to harmonise with any surroundings. Excellent sound properties in a self-effacing, laid-back shape, to guarantee years of listening pleasure."

Technical Data:
Rated power	140 W
Maximum power	200 W
Nominal impedance	4 Ohm
Frequency response (-10 dB)	28 - 25000 Hz
Mean sound pressure level	86 dB (1 W/1 m)
Cut-off frequency	200 / 2500 Hz
Principle of Housing	Bass Reflex
Net volume	2x 25 l + 7 l
Outer dimension height	1150 mm
Outer dimension width	230 mm
Outer dimension depth	370 mm

Frequency response

Construction

The cut sections of the cabinet, except for the base, are glued as shown in the drawing. Bevels can be cut with an adjustable jigsaw or circular saw. Since it is not always easy to set the exact angle, it is worth making a couple of trial cuts on spare wood.

The cabinet is made with a double floor to enable the crossover to be positioned outside the speaker housing chamber itself. The base to which the crossover is attached is then screwed to the cabinet from below. The pre-drilled cable holes inside the housing must be filled afterwards using hot-melt glue or silicon mastic.

Inner damping

Half a mat of damping material is placed inside the mid-range housing while 2 mats each are placed inside the woofer spaces. The space behind the bass reflex tubes should remain free.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter:	KE 25 SC 8 Ohm	1 piece
Midrange:	AL 130 M 8 Ohm	1 piece
Woofers:	AL 170 8 Ohm	2 pieces
Crossover:	Crossover Atlantis
Bass reflex tubes:	BR 13.25 (full length)	2 pieces
Terminal:	BT 95/75	1 piece
Damping material:	Polyester wool	2,5 bags
Special wood screws:	4 x 25 mm	16 pieces
Countersunk screws:	3,5 x 25 mm	12 pieces
Cable:	2 x 1,5 mm²	2,5 m
	2 x 2,5 mm²	2,5 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front / rear panel	1131 x 192	2
Side panels	1131 x 370	2
Top panel	230 x 370	1
Partition	443 x 192	1
Intermediate bottom / brace	332 x 192	2
Midrange bottom panel	332 x 153	1
Midrange side panels	305 x 345	2
Midrange braces	305 x 41	2
Bottom panel	331 x 191	1

Material: Wood
Lath	20 x 20 x 192	2

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Any questions? Phone us in Australia: Sydney +61 2 4627 8766 or Melbourne +61 3 9859 0388
or email us: info@soundlabsgroup.com.au