Aria Dipol 1

Our Price: AU $965.00 inc. GST per pair without cabinets
AU $877.27 export price per pair without cabinets

Product Code: V-5944

This item is listed in the following categories:
2 Way Speakers, Effect Speakers, Visaton Kits

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5944

Characteristics - Sound Properties

The ARIA DIPOL 1 is intended specifically as an effect speaker for the rear channels in multichannel systems. It unites two concepts: It can be used in both dipole and direct modes. By activating the two outer tweeters, something approaching the dipole effect is achieved, i.e. a diffused sound field. At the same time, the centre tweeter is deactivated. This solution cannot achieve the perfect diffused field of a full dipole set-up, which uses twin cones in the bass department as well, but it does represent a good, value-for-money compromise.
ARIA DIPOL 1 speakers can be combined wither with the other members of the ARIA family or with larger speakers such as the VOX 200.

ARIA DIPOL 1 is part of the combinations:
System ARIA B
System ARIA B
System ARIA D
System ARIA D
System ARIA F
System ARIA F

Accessories

Switch		1 piece

Similar products
ARIA	ARIA 2
ARIA 2 KE	ARIA KE
TOPAS

Extract from Klang & Ton

"In contrast, the Arias demonstrated liveliness and a fine understanding for the subtleties of the film soundtracks. They are, however, robust enough to belt it out, if the need be."
"The two dipoles interface seamlessly with the music experience and ensure that the combination achieves impressive homogeneity. Once again, it became abundantly clear that the sound characteristics of all the speakers in a surround set are of crucial importance, as demonstrated adequately by the Aria combination."
"Visaton's surround set based on the Aria speakers has unmistakably set them apart from the crowd. Despite its compact size, the set has the power and control to make a real impact."

Technical Data:
Rated power	40 W
Maximum power	60 W
Nominal impedance	8 Ohm
Frequency response (-10 dB)	75 - 30000 Hz
Mean sound pressure level	84 dB (1 W/1 m)
Cut-off frequency	2500 Hz
Principle of Housing	Bass Reflex
Net volume	4,5 l
Outer dimension height	270 mm
Outer dimension width	260 mm
Outer dimension depth	121 mm

Construction

The cabinet body uses 16 mm boards. First of all, cut the holes in the boards and apply the bevels. This can be done using an electric jigsaw or hand-held circular saw set to the required angle. Once the cabinet has been completed, apply the milling work for the loudspeaker. Finally, fit the cones.
Since the cabinets are relatively small, it is hardly possible to mount the crossover inside the housing. It can, however, simply be wrapped in damping material and placed inside the speaker if the rear wall is not removable.

Inner damping

The damping material is loosely arranged in the cabinet.

Component parts list for 1 box

The kit includes all necessary components (see list below). Cabinet parts are not included.

Tweeter:	G 20 SC 8 Ohm	3 pieces
Woofer:	TI 100 8 Ohm	1 piece
Crossover:	Crossover ARIA DIPOL 1
Bass reflex tube:	BR 6.8 (full length)	1 piece
Terminal:	ST 77	1 piece
Damping material:		¼ bag
Wood screws:	3,5 x 19 mm	4 pieces
Countersunk screws:	3,5 x 25 mm	16 pieces
Cable:	2 x 1,5 mm²	1,25 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 16 mm chipboard or MDF
Front	270 x 130	1
Side panel	270 x 140	2
Rear panel	270 x 233	1
Top and bottom panel	215 x 89,2	2

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Order by phone: (02) 4627-8766 or 0411-88-1967

Offices in Sydney and Melbourne

General enquiries: +61 (0)2 4627-8766 or 0411-88-1967; email us: info@soundlabsgroup.com.au