Nano SUB

Our Price: AU $410.00 inc. GST each
AU $372.73 export price each

Product Code: V-5936

This item is listed in the following categories:
Visaton Kits, Sub Sat Systems, Subwoofers

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5936

Characteristics - Sound Properties

If you combine the NANO SAT MK II with the NANO SUB PR, you get a speaker system that is totally living-room friendly consisting of tiny satellites and a compact subwoofer which, all-in-all, sounds like a far larger, uncompromising column speaker set-up.

The BR 25.50 bass reflex tube with its flow-optimised, curved trumpet vent, contributes to the good overall sound of the subwoofer. The subwoofer cannot be located due to its 18 dB filter and separation at 150 Hz. A high-pass system and reflex balance enable the two tiny, magnetically screen satellites to produce remarkably dynamic sound. They can, therefore, also be used as centre or surround speakers for Surround systems at home.

Similar products
NANO SAT MK II

Extract from Hobby HiFi

"The NANO system demonstrated clearly in the HOBBY HiFi test chamber that it music is a thing to be enjoyed. The response was extremely lively. But there was not the slightest hint of overdone effects..."
"Particularly impressive was the dynamism that the subwoofer satellite system is evidently capable of. Anyone would agree that the bass unit has excellent level accuracy, but the satellites left us gasping for breath."
"NANO is the solution where you want loudspeakers that are smaller than small." ... "However, you will not need to compromise sound quality: this speaker system can take its place at the top of the quality range."

Technical Data:
Rated power	2x 60 W
Maximum power	2x 90 W
Nominal impedance	2x 4 Ohm
Frequency response (-10 dB)	30 - 150 Hz
Mean sound pressure level	85 dB (2x 2,83 V/1 m)
Cut-off frequency	150 Hz
Principle of Housing	Bass Reflex
Net volume	39 l
Outer dimension height	559 mm
Outer dimension width	270 mm
Outer dimension depth	420 mm

Frequency response SUB/SAT

Construction

The boards for the subwoofer are glued (butt jointed) as shown in the drawing and subsequently the openings cut out. The fabric tensioning frame is fixed to the cabinet using wooden frame plugs.

Inner damping

The damping material is distributed uniformly inside the subwoofer cabinet but leaving the space behind the bass reflex tube free.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Woofer:	GF 200 2 x 4 Ohm	1 piece
Crossover:	Crossover NANO SUB
Bass reflex tube:	BR 25.50 (full length)	1 piece
Terminal:	BT 95/75	1 piece
Damping material:	Polyester wool	3 mats
Frame dowels:		8 pieces
Wood screws:	4 x 20 mm	10 pieces
Countersunk screws:	3,5 x 25 mm	4 pieces
Cable:	2 x 1,5 mm²	2 m
Material for covers:	black, width 50 cm	1 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front panel	270 x 270	2
Side panel	381 x 270	4
Rear panel	559 x 232	1
Top and bottom panel	362 x 232	2
Frame	362 x 57	2
Frame	194 x 57	1

Material: 16 mm MDF
Grille board	265 x 265	2

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Any questions? Phone us in Australia: Sydney +61 2 4627 8766 or Melbourne +61 3 9859 0388
or email us: info@soundlabsgroup.com.au