MB 208-H

Our Price: AU $240.00 inc. GST each without cabinets
AU $218.18 export price each without cabinets

Product Code: V-5931

This item is listed in the following categories:
2 Way Speakers, PA Speakers, Visaton Kits, 4 - 8 Ohm

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5931

Characteristics - Sound Properties

The MB 208/H is a compact, high-output speaker. It is equipped with two high-efficiency 20 cm fullrange BG 20 8 Ohm 's, working in parallel, and the HTH 8.7 8 Ohm tweeter. Apart from being ideal as a monitor speaker for vocals and instruments, in smallish to medium-sized rooms, it is also a good candidate for combining with a good subwoofer (e.g. MB 115/B ) for larger PA events.

As a result of the D'Appolito arrangement, less sound is dissipated upwards and downwards. This directional advantage reduces the amount of ceiling and floor reflection in large halls, and will result in better voice transmission and less tendency to feedback. The sound quality of the MB 208/H is extremely high. The sound imbalance often experienced with musicians systems is missing here. In conjunction with the MB 115/B, there is no reason why hi-fi sound quality should not be achieved.

The compact design makes it ideal for transport.

MB 208/H is part of the combinations:
PA Combination A

Similar products
MB 115/B	MB 115/H

Extract from HobbyHiFi

"Verdict: This combination of 208/H and 115/B provides excellent sound properties at hi-fi level, and with masses of dynamic power in reserve. Thanks to the high efficiency level, even a 100-watt amplifier will provide the enough power - calculations show that this would produce a maximum output of 113 db, even if a more powerful booster will make even more sense of both the satellites and the bass."

Technical Data:
Nominal power handling with high pass	200 W
Peak power handling with high pass	300 W
Rated power	80 W
Maximum power	140 W
Nominal impedance	4 Ohm
Frequency response (-10 dB)	85 - 20000 Hz
Mean sound pressure level	94 dB (1 W/1 m)
Cut-off frequency	4500 Hz
Principle of Housing	Closed
Net volume	23 l
Outer dimension height	640 mm
Outer dimension width	240 mm
Outer dimension depth	240 mm

Frequency response

Construction

First, cut the openings for the drivers in the front panel. The boards are then simply glued together (butt-joints) as shown in the parts list, with the front panel set back a little. The crossover is attached at the rear of the cabinet behind one of the bass vents.

Inner damping

The damping of the cabinet uses two mats of damping material rolled loosely and pushed into the cabinet through a bass opening.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter:	HTH 8.7 8 Ohm	1 piece
Woofer:	BG 20 8 Ohm	2 pieces
Crossover:	Crossover MB 208/H
Terminal:	ST 77	1 piece
Damping material:	Polyester wool	1 bag
Wood screws:	3,5 x 19 mm	8 pieces
	4 x 20 mm	8 pieces
Countersunk screws:	3,5 x 25 mm	4 pieces
Cable:	2x 1,5 mm²	2 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 16 mm chipboard or MDF
Front / rear panel	608 x 208	2
Top / bottom panel	240 x 208	2
Side panels	240 x 640	2

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Order by phone: (02) 4627-8766 or 0411-88-1967

Offices in Sydney and Melbourne

General enquiries: +61 (0)2 4627-8766 or 0411-88-1967; email us: info@soundlabsgroup.com.au