Starlet

Our Price: AU $499.00 inc. GST per pair
AU $453.64 export price per pair

Product Code: V-5929

This item is listed in the following categories:
Visaton Kits, Floorstanding, 3 Way Speakers

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

Art. No. 5929

Characteristics - Sound Properties

The STARLET is a 3-way speaker which is extremely good value for money. The individual drivers used here have all proved their worth in numerous well-known constructions.

At the bottom end of the frequency range, there is the W 200 S 8 Ohm from the EXPERIENCE V 20, mounted in a 58 litre vented cabinet. The mid- to high-range is covered by the W 100 S 8 Ohm and DT 94 8 Ohm from the ALTO series of speakers.

The impression given by the STARLET is of a solid low-frequency foundation with powerful, crisp bass. The mid-range has a pleasant, unobtrusive sound, and at the higher frequency ranges the STARLET produces sparkling, clear-cut treble. In a nutshell, the STARLET is an extremely reasonably priced column speaker with a well-rounded tonal character and good power handling capabilities.

Accessories

Protective grille:	NG 4"	for W 100 S	1 piece

Similar products
ALTO GENESIS SAT	ALTO GENESIS SUB
ALTO I	ALTO II
ALTO III C	ALTO LINE
EXPERIENCE V 20

Extract from Mega

"The Starlet sounds … crisp, pleasant and well-rounded, … but with a solid bass foundation that ensures sufficient power and depth but without becoming overpowering. The mid- and high-ranges were well distinguished, clearly defined, devoid of all aggression and crisply reproduced."

Sound properties and value for money: very good

Technical Data:
Rated power	100 W
Maximum power	150 W
Nominal impedance	8 Ohm
Frequency response (-10 dB)	30 - 22000 Hz
Mean sound pressure level	86 dB (1 W/1 m)
Cut-off frequency	500 / 5000 Hz
Principle of Housing	Bass Reflex
Net volume	58 l
Outer dimension height	1000 mm
Outer dimension width	270 mm
Outer dimension depth	300 mm

Frequency response

Construction

The construction of the STARLET has been designed to provide a good starting point for even the least experienced craftsman since all the boards are straight sides and just glued together. The cover for the mid-range (AK 10.13) has to be fitted from behind over the cut-out in the baffle for the mid-range, before the baffle is glued in (remember the cables!) The crossover unit is attached to the rear panel behind the cut-out in the baffle for the bass speakers.

Inner damping

The damping material is evenly distributed throughout the entire cabinet. But leave the area directly behind the bass tube free. About 1/4 of a mat of damping material is loosely pushed into the cover before the mid-range drivers are fitted.

Component parts list for 1 box

The kit includes all the components listed here but not the cabinet.

Tweeter:	DT 94 8 Ohm	1 piece
Midrange driver:	W 100 S 8 Ohm	1 piece
Woofer:	W 200 S 8 Ohm	1 piece
Crossover:	Crossover Starlet
Cover cap:	AK 10.13	1 piece
Bass reflex tube:	BR 15.34 (length 8 cm)	1 piece
Terminal:	ST 77	1 piece
Damping material:	Polyester wool	3 bags
Wood screws:	3,5 x 19 mm	21 pieces
Cable:	2 x 1,5 mm²	3,5 m
		................

Cabinet parts list for 1 box

Parts	Size (mm)	Quantity

Material: 19 mm chipboard or MDF
Front and rear panel	1000 x 270	2
Side panels	1000 x 262	2
Top and bottom panel	232 x 262	2
Brace	232 x 80	1
Brace	262 x 80	1

Crossover

Sketch

Looking for a specific product? Click here for our site index.

Any questions? Phone us in Australia: Sydney +61 2 4627 8766 or Melbourne +61 3 9859 0388
or email us: info@soundlabsgroup.com.au