5.6uF 250V MKT Film Capacitor

Our Price: AU $7.00 inc. GST
AU $6.36 export price

Product Code: MU-MKT5u6-250V

This item is listed in the following categories:
Capacitors - MKT, Mundorf

Quantity in your cart: None

Quantity:

Shipping Calculator: add to cart to first!

MKT capacitors are metallised polyester film capacitors. They range both in price and in quality between the low-loss Mundorf M-Cap and the inexpensive bipolar electrolytic capacitors. The loss factor of an MKT capacitor is about 20 times that of an M-Cap, but less than a tenth of the loss factor of a bipolar electrolytic capacitor. MKT capacitors represent what could be called the “upper middle class” of capacitors. They are used both as parallel capacitors in high-end equipment as well as in signal paths of good but affordably designed crossover components.

Specifications

Dielectric: Polyester
Dielectric strength: 250 VDC
Tolerance: ± 5%
Loss factor: tan ∂ < 0.005 at 1kHz
Wire length approx. 55mm
Wire diameter: 0.8mm

Dimensions

Mundorf MKT capacitor dimensions - refer to table below.

Value	Size H x W x L (mm)
1.0µF / 250VDC	10 x 5 x 27
1.5µF / 250VDC	10 x 5 x 27
1.8µF / 250VDC	12 x 8 x 27
2.2µF / 250VDC	12 x 8 x 27
2.7µF / 250VDC	12 x 8 x 27
3.3µF / 250VDC	15 x 10 x 27
3.9µF / 250VDC	15 x 10 x 27
4.7µF / 250VDC	15 x 10 x 27
5.6µF / 250VDC	17 x 12 x 27
6.8µF / 250VDC	17 x 12 x 32
8.2µF / 250VDC	19 x 14 x 32
10µF / 250VDC	19 x 14 x 32
12uF / 250VDC	19 x 14 x 32
15µF / 250VDC	24 x 15 x 38
22µF / 250VDC	27 x 18 x 38
33µF / 250VDC	32 x 24 x 38
47µF / 250VDC	37 x 28 x 48
56µF / 250VDC	37 x 28 x 48
68µF / 250VDC	42 x 32 x 48
82µF / 250VDC	45 x 34 x 48
100µF / 250VDC	50 x 40 x 48

Looking for a specific product? Click here for our site index.

Any questions? Phone us in Australia: Sydney +61 2 4627 8766 or Melbourne +61 3 9859 0388
or email us: info@soundlabsgroup.com.au